View LP104S5_638430.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
SPECIFICATION FOR APPROVAL
( ) Preliminary Specification ( ) Final Specification
Title
10.4" SVGA TFT LCD
SUPPLIER Model LG.Philips LCD Co., Ltd. LP104S5 A2VT
BUYER MODEL
SUFFIX
* When you obtain standard approval , please use the above model name without suffix.
SIGNATURE /
DATE
APPROVED BY S. H. Kang / G.Manager REVIEWED BY J. H. Lee / Manager H.S. Yoon / Manager PREPARED BY S.Y. Lee / Engineer J.H. Hwang / Engineer
DATE
/
/
Please return 1 copy for your confirmation with your signature and comments.
Product Engineering Dept. LG.Philips LCD Co., Ltd.
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 1 / 23
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
CONTENTS
NO. 1 2 3 3-1 3-2 3-3 3-4 3-5 3-6 4 5 6 7 7-1 7-2 8 8-1 8-2 9 COVER CONTENTS RECORD OF REVISIONS GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS ELECTRICAL CHARACTERISTICS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR INPUT DATA REFERENCE POWER SEQUENCE OPTICAL SPECIFICATIONS MECHANICAL CHARACTERISTICS RELIABILITY INTERNATIONAL STANDARDS SAFETY EMC PACKING DESIGNATION OF LOT MARK PACKING FORM PRECAUTIONS 22 22 23 21 21 6 7 9 10 11 12 13 16 20 ITEM Page 1 2 3 4 5
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 2 / 23
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
RECORDS OF REVISIONS
Version No 0.0 Date Oct 06, 2000 Page First draft DESCRIPTION
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 3 / 23
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
1. General Description
The LP104S5-A2VT is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode. This TFT-LCD has a 10.4 inches diagonally measured active display area with SVGA resolution(600 vertical by 800 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors. The LP104S5-A2VT is intended to support applications where thin thickness is critical factors and graphic displays are important. In combination with the vertical arrangement of the sub-pixels, the LP104S5-A2VT characteristics provide an excellent flat panel display for office automation products such as Notebook PC.
TTL interface
Timing Control Block
Row Driver circuit
Column driver circuit
CN1
TFT-LCD (800 X 600)
Power Block
CN2
Backlight Ass'y CN1: FI-XB30S-HF10 or equivalent , CN2: BHSR-02VS-1(JST)
General Features
Active screen size Outline dimensions Pixel pitch Pixel format Color depth Luminance,White Power Consumption Weight Display operating mode Surface treatments 10.4 inches(264.16mm) diagonal 224.5(H) X 172.0(V) X 5.7(D) mm (Typ.) 0.264 mm X 0.264 mm 800 horiz. by 600 vert. pixels RGB stripe arrangement 6-bit, 262,144 colors 170 cd/m (Typ.) Total 3.9 Watt(Typ.) 310g (Typ.) Transmissive mode, normally white Hard coating (3H), Anti-glare treatmentAlpha Point Ltd. of the front polarizer
Vernissakatu 8A 01300 Vantaa, Finland
2
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 4 / 23
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. Table 1 Parameter Power Input Voltage Operating Temperature Operating Tempe. for Panel Storage Temperature Operating Ambient Humidity Storage Humidity ABSOLUTE MAXIMUM RATINGS Values symbol Min. Max. 4.0 VCC -0.3 50 0 TOP 60 0 60 -20 TST 90 10 HOP 90 10 HST
Units Vdc C C C %RH %RH
Notes at 25 5C 1 2 1 1 1
Note: 1. Temperature and relative humidity range are shown in the figure below. Wet bulb temperature should be 39C Max, and no condensation of water.
2. The surface temperature caused by self heat radiation of cell itself is specified on this item.
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 5 / 23
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
3. Electrical Specifications 3-1. Electrical Characteristics
The LP104S5-A2VT requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input which powers the CCFL, is typically generated by an inverter. The inverter is an external unit to the LCD. Table 2 ELECTRICAL CHARACTERISTICS: Parameter Symbol Values Min. Typ. Max. Module 3.6 3.3 3.0 VCC Power Supply Input Voltage 360 290 ICC Power Supply Input Current 1.2 0.96 Pc Power Consumption 1.5 1.0 IRUSH Rush Current Lamp 475(7mA) 500(6mA) 640(3mA) VBL Operating Voltage IBL Operating Current 3.0 6.0 7 845 Established Starting Voltage at 25C 1015 0C 3 Ts Discharge Stabilization Time 80 fBL 45 60 Operating Frequency 3.3 PBL 3.0 Power Consumption 20,000 Life Time
Units
Notes
Vdc A W A
1 1 3
4 VRMS mA 5 VRMS 5 VRMS 7 min 6 kHz 8 Watts 9 Hours Notes: The design of the inverter must have specifications for the lamp in LCD Assembly. The performance of the Lamp in LCM,for example life time or brightness,is extremely influenced by the characteristics of the DC-AC Inverter.So all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. When you design or order the inverter,please make sure unwanted lighting caused by the mismatch of the lamp and the inverter(no lighting,flicker,etc) never occurs.When you confirm it,the LCD Assembly should be operated in the same condition as installed in your instrument. 1. The specified current and power consumption are under the Vcc = 3.3V , 25C, fv = 60Hz condition whereas mosaic pattern is displayed. 2. The duration of rush current is about 20ms. 3. The variance of the voltage is 10%. 4. The voltage above Vs should be applied to the lamps for more than 1second for start-up. Otherwise,the lamps may not be turned on. 5. The output of the inverter must have symmetrical(negative and positive) voltage waveform and symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may produce interference with horizontal synchronous frequency and as a result this may cause beat on the display. Therefore lamp frequency shall be as away as possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. 6. Let's define the brightness of the lamp after being lighted for 5 minutes as 100%. Ts is the time required for the brightness of the center of the lamp to be not less than 95%.
Ver 0.0
Oct.06. 2000
Page 6 / 23
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
7. The lamp power consumption shown above does not include loss of external inverter. 8. The life time is determined as the time at which brightness of lamp is 50% compared to that of initial value at the typical lamp current on condition of continuous operating at 25 2C.
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 7 / 23
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
3-2. Interface Connections
This LCD employs interface connection, a 30 pin connector is used for the module electronics and a two pin connector is used for the backlight system. The electronic interface connector is a FI-XB30S-HF10, manufactred by JAE. The pin configuration for the connector is shown in the table below. Table 3 MODULE CONNECTOR PIN CONFIGURATION (LVDS) Pin Symbol Description Notes 1 Vcc Power (3.3V) 1. Connector 2 Vcc Power (3.3V) 1.1 LCD: FI-XB30S-HF10 or equivalent 3 GND Ground 1.2 Mating:FI-30M (FPC Type) 4 DTMG Data Enable FI-X30H (Cable Type) 5 VSYNC Vertical sync 1.3 Connector pin arrangement 6 HSYNC Horizontal sync 7 GND Ground 8 DCLK Data Clock 30 1 9 GND Ground 10 R5 Red data (MSB) 11 R4 Red data 12 R3 Red data 13 R2 Red data [ LCD Module Rear View ] 14 R1 Red data 15 R0 Red data (LSB) 16 GND Ground 17 G5 Green data(MSB) 18 G4 Green data 19 G3 Green data 20 G2 Green data 21 G1 Green data 22 G0 Green data(LSB) 23 GND Ground 24 B5 Blue data (MSB) 25 B4 Blue data 26 B3 Blue data 27 B2 Blue data 28 B1 Blue data 29 B0 Blue data (LSB) 30 GND Ground
The backlight interface connector is a model BHSR-02VS-1, manufactured by JST. connector part number is SM02B-BHSS-1 or equivalent. shown in the table below. Table 4 Pin 1 2 Notes: BACKLIGHT CONNECTOR PIN CONFIGURATION Symbol Description Power supply for lamp HV (High voltage side) Power supply for lamp LV (Low voltage side)
The mating
The pin configuration for the connector is
Notes 1 1
1. The high voltage side terminal is colored pink. The low voltage side terminal is black
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 8 / 23
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
3 - 3 . Signal Timing Specifications Sign al
All of the interface signal timing should be satisfied with the following specifications for it's proper operation. Table 6 Timing Table ITEM Dclk Hsync Period Period Width-Active Vsync Period Frequency Width-Active DE (Data Enable) H-Back Porch H-Front Porch V-Back Porch V-Front Porch SYMBOL tCLK tHP tWH tVP fV tWV tHBP tHFP tVBP tVFP MIN. 25 990 12 604 1 30 30 0 3 TYP. 26 1024 625 60 MAX. 27 1100 120 730 24 tHP tHP Hz tHP tCLK UNIT ns tCLK NOTE TYP. 38.5MHz
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 9 / 23
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
3-4. Signal Timing Waveforms
Hsync, Vsync, DE, DATA
0.7Vcc 0.3Vcc
0.5VCC 0.5V CC
DCL VALID INVALID DAT DE(Data Enable) INVALID
H s ync t WH t HBP D E(Data
t HP t HF
t VP t WV Vsync t VBP t VFP
DE(Data Enable)
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 10/23 10/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
3-5. Color Input Data Reference
The brightness of each primary color(red, green and blue) is based on the 6-bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. Table 7 COLOR DATA REFERENCE Input Color Data Red Green LSB MSB LSB MSB
Color MSB
Blue LSB
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 000000000000000000 Black 111111000000000000 Red(63) 000000111111000000 Green(63) Basic Blue(63) 000000000000111111 000000111111111111 Colors Cyan 111111000000111111 Magenta 111111111111000000 Yellow 111111111111111111 White Red(00) Dark 000000000000000000 Red(01) 000001000000000000 Red(02) 000010000000000000 Red : : : : : : : : : : : : : : : : : : Red(61) 111101000000000000 Red(62) 111110000000000000 Red(63) Bright 111111000000000000 000000000000000000 Green(00)Dark 000000000001000000 Green(01) 000000000010000000 Green(02) Green : : : : : : : : : : : : : : : : : : 000000111101000000 Green(61) 000000111110000000 Green(62) Green(63)Bright 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Blue(00) Dark 000000000000000000 Blue(01) 000000000000000001 Blue(02) 000000000000000010 Blue : : : : : : : : : : : : : : : : : : Blue(61) 000000000000111101 Blue(62) 000000000000111110 Blue(63) Bright 000000000000111111
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 11/23 11/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
3-6. Power Sequence
90% Power Supply For LCD VCC 10% 0V T1 Interface Signal, Vi (LVDS Signal of Transmitter) 0V Power for Lamp OFF T3 LAMP ON Valid Data T4 T2 T5
90% 10% T6 T7
OFF
Parameter Min. T1 T2 T3 T4 T5 T6 T7 0 200 200 0 400
Values Typ. -
Units Max. 10 50 50 10 ms
Notes: 1. Please avoid floating state of interface signal at invalid period. 2. When the interface signal is invalid, be sure to pull down the power supply for LCD VCC to 0V. 3. Lamp power must be turn on after power supply for LCD and interface signal are valid.
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 12/23 12/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
4. Optical Specifications
Optical characteristics are determined after the unit has been `ON' and stable for approximately 30 minutes in a dark environment at 25C. The values specified are at an approximate distance 50cm from the LCD surface at a viewing angle of and equal to 0C. FIG 1. presents additional information concerning the measurement equipment and method. FIG. 1 Optical Characteristic Measurement Equipment and Method Optical Stage(x,y) LCD Module Field = 1 Prichard 880 or equivalent
500mm
Table 8 mA)
OPTICAL CHARACTERISTICS Parameter Symbol
( Ta=25C, Vcc=3.3V, f V =60Hz, Dclk=38.5MHz, IBL= 6 Values Typ. 200 170 1.35 30 30 TBD TBD TBD TBD TBD TBD 0.313 0.329 Units Max. 1.45 50 50 cd/m2 ms 1 2 3 4 Notes
Min. Contrast Ratio Surface Luminance, white Luminance Variation Response Time Rise Time Decay Time CIE Color Coordinates Red Green Blue White Viewing Angle x axis, right (=0) x axis, left(=180) y axis, up(=90) y axis, down (=270) Gray Scale Notes: CR L WH 150 -
WHITE Tr TrR TrD xR yR xG yG xB yB xW yW r l u d
0.283 0.299 40 40 10 30 -
0.343 0.359 degree 5
6
1. Contrast Ratio (CR) is defined mathematically as : Surface Luminance with all white pixels Contrast Ratio = Surface Luminance with all black pixels 2. Surface luminance is the center point across the LCD surface 50cm from the surface with all
Ver 0.0
Oct.06. 2000
Page 13/23 13/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
pixels displaying white. For more information see FIG 1. 3. The variation in surface luminance, WHITE is determined by measuring LON at each test position 1 through 5, and then dividing the maximum L ON of 5 points luminance by minimum L ON of 5 points luminance. For more information see FIG 2. WHITE Maximum (LON1, L ON2, ....L ON5) / Minimum (LON1, LON2, ....LON5) 4. Response time is the time required for the display to transition from white to black (Rise Time, TrR) and from black to white (Decay Time, TrD). For additional information see FIG 3. 5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG 4. 6.Gray scale specification. * Gamma Value = 2.2 Gray Level L0 L7 L15 L23 L31 L39 L47 L55 L63 FIG. 2 Luminance 200 400 600 400 Luminance(%) (Typ.)
TBD TBD TBD TBD TBD TBD TBD TBD 100
1 3 4
2
1 50 300 300
5
450
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 14/23 14/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
FIG. 3 Response Time The response time is defined as the following figure and shall be measured by switching the input signal for `black' and `white'.
%
TrR
TrD
100 90
Opt i c a l Res p o n s e
10 0
whi t e
bl ack
whi t e
FIG. 4 Viewing angle
= 90
(1 :00) 2
= 0
yu z A
=180
(9 :00)
xl
= 0
(3 :00)
xr
TT L D FC MD L OUE
z'
yd
=270
(6 :00)
A: Eye o
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 15/23 15/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
5. Mechanical Characteristics
The contents provide general mechanical characteristics for the model LP104S5-B2AP LCD. In addition, the figures in the next page are detailed mechanical drawings of the LCD. Outside dimensions : Horizontal Vertical Depth Bezel area : Horizontal Vertical Active Display area : Horizontal Vertical Weight (approximate) : Surface Treatment : Hard coating (3H) Anti-glare treatment of the front polarizer 211.2 mm 158.4 mm 310g (Typ.), 320g(Max.) 214.2 0.5 mm 161.8 0.5 mm 224.5 0.5 mm 172.0 0.5 mm 5.7 0.3 mm
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 16/23 16/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
< FRONT VIEW >
Ver 0.0
Oct.06. 2000
Page 17/23 17/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
< REAR VIEW >

Ver 0.0
Oct.06. 2000
Page 18/23 18/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
TOP CASE (SUS Panel Supporter Main
4 -M2 Bottom Cover (SUS
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 19/23 19/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
6. Reliability
Environment test condition No. 1 2 3 4 5 Test Item High temperature storage test Low temperature storage test Conditions Ta = 60C 240h Ta = -20C 240h
High temperature operation test Ta = 50C 50%RH 240h Low temperature operation test Ta = 0C 240h Vibration test (non-operating) Sine wave, 10~500~10Hz, 1.5G, 0.37oct/min, 3 axis, 1 hour/axis Half sine wave, 180G, 2ms, one shock of each six faces (i.e. run 180G 2ms for all six faces.)
6
Shock test (non-operating)
7
Altitude operating storage/shipment 0 - 10,000 feet (3048m) 0 - 40,000 feet (12192m)
{Result Evaluation Criteria} There should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition.
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 20/23 20/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
7. International Standards 7-1. Safety
a) UL 1950 Third Edition, Underwriters Laboratories, Inc. Jan. 28, 1995. Standard for Safety of Information Technology Equipment Including Electrical Business Equipment. b) CAN/CSA C22.2 No. 950-95 Third Edition, Canadian Standards Association, Jan. 28, 1995. Standard for Safety of Information Technology Equipment Including Electrical Business Equipment. c) EN 60950 : 1992 + A1 : 1993 + A2 : 1993 + A3 : 1995 + A4 : 1997 + A11 : 1997 IEC 950 : 1991 + A1 : 1992 + A2 : 1993 + A3 : 1995 + A4 : 1996 European Committee for Electrotechnical Standardization (CENELEC) EUROPEAN STANDARD for Safety of Information Technology Equipment Including Electrical Business Equipment.
7-2. EMC
a) ANSI C63.4 `Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz.' American National Standards Institute(ANSI),1992. b) C.I.S.P.R `Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.' International Special Committee on Radio Interference c) EN 55022 `Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.' European Committee for Electrotechnical Standardization (CENELEC),1988
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 21/23 21/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
8. Packing 8-1. Designation of Lot Mark
a) Lot Mark A B C D E F G H I J K L M
A, B ,C : INCH CODE D : YEAR E : MONTH F,G : PANEL CODE H : ASSEMBLY CODE I,J,K,L,M : SERIAL NO. Note : 1. YEAR YEAR Mark 97 7 98 8 99 9 2000 0 2001 1 2002 2 2003 3 2004 4 2005 5 2006 6 2007 7
2. MONTH MONTH Mark Jan. 1 Feb. 2 Mar. 3 Apr. 4 May. 5 Jun. 6 Jul. 7 Aug. 8 Sep. 9 Oct. A Nov. B Dec. C
b) Location of Lot Mark Serial NO. Is printed on the label. The label is attached to the backside of the LCD module. This is subject to change without prior notice.
8-2. Packing Form
a) Package quantity in one box : 10 pcs b) Box Size : 371mm X 239mm X 300mm
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 22/23 22/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
9.PRECAUTIONS
Please pay attention to the followings when you use this TFT LCD module.
9.1 MOUNTING PRECAUTIONS
(1) You must mount a module using holes arranged in four corners or four sides. (2) You should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to the module. And the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) Please attach a transparent protective plate to the surface in order to protect the polarizer. Transparent protective plate should have sufficient strength in order to resist external force. (4) You should adopt radiation structure to satisfy the temperature specification. (5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polalizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the surface of polarizer for bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.) (7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaked with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. Do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes deformations and color fading. (9) Do not open the case because inside circuits do not have sufficient strength.
9.2 OPERATING PRECAUTIONS
(1) The spike noise causes the mis-operation of circuits. It should be lower than following voltage : V = 200mV (Over and under shoot voltage). (2) Response time depends on the temperature. (In lower temperature, it becomes longer.) (3) Brightness depends on the temperature. (In lower temperature, it becomes lower.) And in lower temperature, response time (required time that brightness is stable after turned on ) becomes longer. (4) Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur. (5) When fixed patterns are displayed for a long time, remnant image is likely to occur. (6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference.
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 23/23 23/
LP104S5-A2VT LP104S5Liquid Crystal Display Product Specification
www..com
9.3 ELECTROSTATIC DISCHARGE CONTROL
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground through wrist band etc . And don't touch interface pin directly.
9.4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
Strong light exposure causes degradation of polarizer and color filter.
9.5 STORAGE
When storing modules as spares for a long time, the following precautions are necessary. (1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5C and 35C at normal humidity. (2) The polarizer surface should not come in contact with any other object. It is recommended that they be stored in the container in which they were shipped.
9.6 HANDLING PRECAUTIONS FOR PROTECTION FILM
(1) When the protection film is peeled off, static electricity is generated between the film and polarizer. This should be peeled off slowly and carefully by people who are electrically grounded and with well ion- blown equipment or in such a condition, etc. (2) The protection film is attached to the polarizer with a small amount of glue. If some stress is applied to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to remain on the polarizer. Please carefully peel off the protection film without rubbing it against the polarizer. (3) When the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the polarizer after the protection film is peeled off. (4) You can remove the glue easily. When the glue remains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane.
Alpha Point Ltd. Vernissakatu 8A 01300 Vantaa, Finland
Tel.: +358-9-34 64 34 1 Fax: +358-9-34 64 34 2
http://www.alpha.fi
Ver 0.0 Oct.06. 2000 Page 24/23 24/

▲Up To Search▲

Price & Availability of LP104S5

	To Download LP104S5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .